• 3508 Meadowview Drive, Denton TX 76210

Heavy Industrial Transport Solutions

DMS is Partnered with Hedin whose core competence is lifting, turning and transport of heavy and geometrically demanding loads. Single transport carts as well as single machines and complete flow production lines are produced.

Among the many customer you can find using HEDIN for their heavy transport solutions:
Vestas , Siemens , ABB , BAE , Sonaca , Boeing , Caterpilllar , Volvo , Jaguar , Magna and many more……………..

Hedin Pallet Trucks consist of a drive unit with fix connected load forks. As standard design they are available up to 5o tons load capacity. Pallet Transport Trucks with higher load capacity can be offered as special solutions on request. Whilst the drine unit is standardized as far as possible, the load unit always is designed customer – specific, in order to meet customers requirements. As an option these transporters can be equipped with radio control in order to allow the operator to choose the position which grants him the optimal working conditions, in front, behind or at the side of the truck.  Also available as an option is an operators platform to ride on, which can be swivelled out at the rear side of the truck.

Coilcar with low lift:
Can pick up coils up to 40 tons onto its prism and hand it over to a suitable decoiler.
Can pick up coils directly from a recoiler onto its prism or onto an exchangable prism stand.
This Coil Transport Car makes your coilfeeding line independent from the avalilability of an overhead crane.

Coilcar with high lift on a pike – spike:
Transport coils up to 40 tons weight and lift them up to 2500 mm mandrel height.
Pick up coils at the coil storage and transport them to the coil feeding line and to position them there, for example onto a stationary coil car.
Substitute within the building the missing end-to end crane runway.


25 tons Coilcar with high lift.
20 tons Coilcar with short lift.

Die Splitters / Die Manipulators for press Dies /Tools are used for safe and quick maintenance of press dies.
They are available in many different designs, depending of the size and weight of the dies as well as which steps the customer wants to execute during the maintenance or cleaning of the press dies.

Die Splitter for 6 ton Dies

 

Die Separator for 30 ton Dies

Die Splitter/Turners single sheet leaflet

Die Change Carts – Low lift

Hedin Tool Change Carts.
Available from 5 up to 100 ton or more.
Docking to the press
Very strong Push/Pull device
Pedestrian Walk beside the cart with the Radio

Small footprint – small turning radius
Emission free electrical drive
No counterweight – light weight
Radio Remote control
Safe and accurate movement
Made out of standard components
Tailor made design and measures to fit your needs.

 

Die Change Carts – High Lift

Hedin Tool Change Carts.
Available from 5 up to 100 ton or more.
Docking to the press
Very strong Push/Pull device
Pedestrian Walk beside the cart with the Radio

Small footprint – small turning radius
Emission free electrical drive
No counterweight – light weight
Radio Remote control
Safe and accurate movement
Made out of standard components
Tailor made design and measures to fit your needs.