• 3508 Meadowview Drive, Denton TX 76210

Tool and Die Supplies

In addition to capital equipment, we also represent and sell many premier manufacturers of precision tooling.  From stock die plates complete with pins and bushings, to nitrogen gas springs, precision punches and dies and even tool steel with same day shipping!  We’ve got you covered!  Take a look at what we can provide you with down below and if you have any questions or would like a quotation; just fill out the form at the bottom of the page.

Tool Steel

We strive to offer some the most competitive prices and fastest lead times on tool steel.  Some of our more popular types of tool steel for sale include: d2 tool steel, o1 tool steel, o1 and a2 tool steel.  In addition to those, we offer many other various materials all cut to the precision sizes you require.  For specific information such as datasheets and mill specifications; please scroll down the page.  For a quote on current pricing/leadtimes click the ‘request a quote’ button or call us at 214-307-2411

MILD/LOW CARBONPRECISION GROUND FLAT STOCK (PGFS)HIGH CARBON/HIGH CHROMEALLOY TOOL STEELSHOCK RESISTING
C1018 is the most commonly available of the cold-rolled steels. It is generally available in round rod, square bar, and rectangle bar. It has a good combination of all of the typical traits of steel – strength, some ductility, and comparative ease of machining. Chemically, it is very similar to A36 Hot Rolled steel, but the cold rolling process creates a better surface finish and better properties.Precision Ground Flat Stock comes in various materials, sizes, tolerances, hardness and annealed condition for use in machining operations and fabrications. O1 Oil Hardening A2 Air Hardening S7 Air Hardening Super Shock D2 High Carbon – High Chrome M2 Moly-Tungsten-High Speed Low CarbonAISI Type D2 is the ideal grade for maximum production runs. Its machinability is superior to any of the similar types of tool steel. It also has excellent wear-resistance and deep hardening properties, and high compressive strength. Use D2 for applications requiring long runs and close tolerances. Use it for tools and dies for blanking, punching, forming, cold-extruding, and other operations requiring high compressive strength and excellent wear resistance.4140 PREHARD/ANNEALED S7 is a shock steel with exceptional impact properties – unnotched Charpy over 200 ft-lb at 400F temper. Since it hardens in air, it is safe and stable in heat treatment. But perhaps the most remarkable characteristic of S7 is its versatility. It is used widely for medium-run cold-work tools and dies, for plastic-molding dies, for shear blades, for medium hot-work dies, for master hobs, and for component parts of many products.

PRECISION PUNCHES AND DIES

Pivot Precision manufactures precision machined components as well as a complete line of standard and special punches and dies for the Aerospace, Ammunitions, Automotive, Dental/Medical, Defense, Electronics and other Commercial Industries.

Pivot Punch & Die Catalog 

Nitrogen Gas Springs

KALLER gas springs are designed to meet customer expectations for reliability, safety and service life mainly in sheet metal forming applications.

The gas spring uses compressed gas, contained in a cylinder and compressed by a piston, to exert a force.

Benefits of the gas spring, compared to a typical mechanical spring, are:

  • ability to create higher force in less space
  • immediate presence of force when stroked
  • low force increase over the stroke
  • easy to adjust the force by increasing or decreasing the amount of gas in the spring.

CONTACT US

For a quote or assistance..

Fill out your information in the form below and click "Submit", and a representative from our company will be in touch.