| Model |
Max Material Width |
Max Stock Length*1 |
Stock Thickness*2 |
Speed Cycle/Min. (recom.)*3 |
Pulling Capacity*4 |
| A2 |
1 – 1/2”
(38.1mm) |
2”
(50mm) |
.002” – .040”
(.051-1.02mm) |
260 |
20 lbs
(9.1kg) |
| A4 |
1 – 1/2”
(38.1mm) |
4”
(101mm) |
.002” – .040”
(.051-1.02mm) |
200 |
20 lbs
(9.1kg) |
| A6 |
1 – 1/2”
(38.1mm) |
6”
(152mm) |
.002” – .040”
(.051-1.02mm) |
160 |
20 lbs
(9.1kg) |
| B2 |
2 – 1/2”
(63.5mm) |
2”
(50mm) |
.002” – .040”
(.051-1.02mm) |
230 |
20 lbs
(9.1kg) |
| B4 |
2 – 1/2”
(63.5mm) |
4”
(101mm) |
.002” – .035”
(.051-0.89mm) |
175 |
20 lbs
(9.1kg) |
| C3 |
3”
(76.2mm) |
3”
(76mm) |
.003” – .075”
(.076-1.91mm) |
195 |
45 lbs
(20.5kg) |
| C6 |
3”
(76.2mm) |
6”
(152mm) |
.003” – .062”
(.076-1.57mm) |
140 |
45 lbs
(20.5kg) |
| C12 |
3”
(76.2mm) |
12”
(305mm) |
.003” – .062”
(.076-1.57mm) |
85 |
45 lbs
(20.5kg) |
| D3 |
4”
(101.6mm) |
3”
(76mm) |
.003” – .075”
(.076-1.91mm) |
175 |
45 lbs
(20.5kg) |
| D6 |
4”
(101.6mm) |
6”
(152mm) |
.003” – .062”
(.076-1.57mm) |
135 |
45 lbs
(20.5kg) |
| W6 |
2”
(50.8mm) |
6”
(152mm) |
.003” – .090”
(.076-2.29mm) |
140 |
100 lbs
(45.5kg) |
| W12 |
2”
(50.8mm) |
12”
(305mm) |
.003” – .062”
(.076-1.57mm) |
85 |
100 lbs
(45.5kg) |
| W20 |
2”
(50.8mm) |
20”
(508mm) |
.003” – .050”
(.076-1.27mm) |
50 |
100 lbs
(45.5kg) |
| F4 |
6”
(152mm) |
4”
(101mm) |
.004” – .075”
(.1-1.91mm) |
160 |
100 lbs
(45.5kg) |
| F6 |
6”
(152mm) |
6”
(152mm) |
.004” – .075”
(.1-1.91mm) |
130 |
100 lbs
(45.5kg) |
| F12 |
6”
(152mm) |
12”
(305mm) |
.004” – .050”
(.1-1.27mm) |
70 |
100 lbs
(45.5kg) |
| F20 |
6”
(152mm) |
20”
(508mm) |
.004” – .035”
(.1-0.89mm) |
35 |
100 lbs
(45.5kg) |
| H4 |
8”
(203mm) |
4”
(101mm) |
.004” – .075”
(.1-1.91mm) |
160 |
100 lbs
(45.5kg) |
| H8 |
8”
(203mm) |
8”
(203mm) |
.004” – .062”
(.1-1.57mm) |
105 |
100 lbs
(45.5kg) |
| FX6 |
6”
(152mm) |
6”
(152mm) |
.005” – .150”
(.13-3.81mm) |
105 |
145 lbs
(66kg) |
| FX12 |
6”
(152mm) |
12”
(305mm) |
.005” – .150”
(.13-3.81mm) |
60 |
145 lbs
(66kg) |
| L6 |
12”
(305mm) |
6”
(152mm) |
.005” – .090”
(.13-2.29mm) |
105 |
145 lbs
(66kg) |
| L12 |
12”
(305mm) |
12”
(305mm) |
.005” – .090”
(.13-2.29mm) |
60 |
145 lbs
(66kg) |
| P6 |
16”
(406mm) |
6”
(152mm) |
.005” – .075”
(.13-1.91mm) |
105 |
145 lbs
(66kg) |
| P12 |
16”
(406mm) |
12”
(305mm) |
.005” – .062”
(.13-1.57mm) |
60 |
145 lbs
(66kg) |
| LX12 |
12”
(305mm) |
12”
(305mm) |
.005” – .125”
(.13-3.18mm) |
50 |
250 lbs
(114kg) |
- 1 Electric Actuating Valve is recommended for feeds that have stroke length over 8” (203mm). Add “E” to model number.
- 2 Thinner materials and/or long strokes with thin materials possible by using anti-buckling guides.
Maximum thickness capacity increases by same percentage as stock width decreases (up to max. of 150%).
- 3 Approximate at maximum stroke length. Heavy stock requires slower speeds.
- 4 At 100 psi (6.9 bar). (Includes allowance for normal friction of moving parts).
Add “W” to Model A or B for replaceable wear plates (standard on all other models).
Add “P” to model no. for feed with control port only. Add “S” to model no. for feed with end-of-stroke sensors.
Feeds should always draw material from a free loop, supplied by a powered reel or powered straightener.
The above graph indicates recommended maximum speeds anticipated for various progressions within each feed series (using an average stock thickness for each series). Feeding heavier stock would lower the maximum speed limit accordingly. 
