UNITIZED

AIDA NS1 Single Point Unitized Straightside Press | 80 - 200 Metric Tons

The AIDA NS1 straightside press, available in both crank and link motion models, has a unitized straightside frame construction which reduces deflection and enables high-precision forming. Features such as centered and full length slide guides, a forced recirculating lubrication system, AIDA’s Hydraulic Overload Protection System, and more make the NS1 a high performance stamping machine.

AIDA NS2 Two Point Unitized Straightside Press | 110 - 300 Metric Tons Capacity

Unitized straightside frame for minimal frame elongation. The NS2 Series is available in both crank motion and link motion models. The AIDA NS2 has a unitized straightside frame for minimal frame elongation (up to NS2-2500, NS2-3000 frame assembly construction tightened by tie rod).

AIDA NSU Two Point Unitized Straightside Press | 200 - 400 Metric Tons Capacity

Same quality and engineering as our other stamping presses, just a few less bells and whistles. 200 to 400 metric ton rating (10% more capacity right out of the box). Designed and constructed for easy, low-cost maintenance.

PROGRESSIVE

AIDA PMX Progressive Die Press | Straightside | 300 - 1000 Metric Tons Capacity

The more accurate your stamping press is the longer the tooling will last – and the parts you produce will be of better quality for longer runs. AIDA’s unique slide link motion design minimizes heat and vibration found in dies run in conventional crank or eccentric shaft presses.

AIDA NSU Progressive Die Press | Straightside | 200 - 400 Metric Tons Capacity

Same quality and engineering as our other stamping presses, just a few less bells and whistles. 200 to 400 metric ton rating (10% more capacity right out of the box). Designed and constructed for easy, low-cost maintenance.

TRANSFER

AIDA SMX Eccentric Gear Transfer Press | Straightside | 300 - 2000 Metric Tons

AIDA’s SMX Series provides uncommon rigidity and precision in a general purpose, straightside press. Because of the high durability design and large front to back bed areas, SMX presses excel in demanding, non-stop production environments that involve large scale parts requiring deep draw stroke lengths and high production rates such as those common in automotive, appliance, furniture and other industries.

LARGE CAPACITY

AIDA S1-E Heavy Stamping Straightside Press 300 - 500 metric tons capacity

The S1-E Series Heavy Stamping Press from AIDA expands the range of high-accuracy, heavy stamping by achieving three important elements in the stamping of thick plate: ■ Extends the die life ■ Reduces vibration and noise ■ Maintains high accuracy and high productivity

TIE ROD FRAME

AIDA MCX Two Point Straightside Press | 315 - 1250 Metric Tons Capacity

Single or Double Gear, 1/4 or 1/2 inch rating points, Mechanical or Servo. The MCX Series from AIDA offers the highest level of customization through multiple configurations. What does this mean for your stamping operation?

AIDA NST Two or Four Point Straightside Press | 300 - 1200 Metric Tons Capacity

Created to meet your conventional stamping press requirements in the most unconventional ways. High-end features with low-end pricing. The AIDA NST press is conventional in name and price only. No glitz, just guts, the NST press was created for high performance, multi-purpose work with the same attention to detail, quality and engineering as every other AIDA solution.

SERVO PRESSES

AIDA DSF-M2 Straightside Servo Press | 315 - 1250 Metric Tons Capacity

With its first servo press produced in 1996, AIDA SERVOPRO® presses have proven their reliability time and again in over 800 installations worldwide. Throughout these years, and thanks to our customers’ valuable feedback, AIDA has increased the understanding of servo drive technology for daily production use.

AIDA DSF-N1 Straightside Servo Press | 80 - 300 Metric Tons Capacity

Featuring the AIDA Servo Press Drive technology that revolutionized the metalforming industry: Imagine being able to dial-in the stroke, velocity and dwell profile for any job . . . blanking, drawing, high precision, exotic materials . . . all on one press. With AIDA DSF Servo Press technology, you can have each press you own performing like multiple presses . . .